# Will AI replace electricians, plumbers and mechanics?

> Software now writes the estimate, books the call and suggests the likely fault. It does not crawl under the house. The hands-on side of plumbing, electrical, HVAC and auto service is some of the hardest work there is for a robot, and labs are paying for video of it for that reason.

By [Linus Näslund](https://corpusmarket.com/about.md), Co-Founder

## Will AI replace electricians? The short answer

No, and the same goes for plumbers, HVAC technicians and mechanics. AI is changing the office side of these trades quickly. The hands-on side, the part done in an attic, under a sink or under a hood, is a different problem and much further from being solved.

It helps to split the question in two. Software that reads, writes and predicts is one thing. A machine that can reach behind a water heater and free a stuck union is another. The first is here. The second is not. Our page on whether [robots will take jobs](https://corpusmarket.com/robotics/will-robots-take-jobs.md) goes through the wider picture.

## What AI already does around the trades

Most of what is sold to trade businesses as AI works on information, not on pipe or wire.

- **Diagnostics.** Scan tools read a vehicle's fault codes and suggest likely causes. Connected thermostats and HVAC equipment report faults before the technician arrives.
- **Estimating.** Software builds a quote from photos, plans or a parts list and looks up labor times.
- **Scheduling and dispatch.** Calls are answered, jobs are booked and routes are planned with little human input.
- **Paperwork.** Invoices, service reports and parts orders are drafted automatically.
- **Lookup.** A technician can ask about a wiring diagram, a code requirement or a service procedure and get an answer in seconds.

All of this saves time. None of it turns a wrench. The suggested fault still has to be confirmed with a meter or a gauge, and the repair still has to be made by hand.

## Trade by trade: what a robot would have to do

### Electricians

The closest thing to an electrician robot today works on large new projects: machines that drill anchor holes in ceilings from the building model, or set solar panels in rows on open ground. Service work is different. A robot would have to fish cable through a finished wall it cannot see into, work out what a previous owner did inside a junction box, and strip and terminate conductors in a panel with an inch of clearance. It would also have to judge when something is unsafe to touch.

### Plumbers

A search for a robot plumber mostly turns up pipe crawlers: camera rigs and cutting tools that travel inside sewer and water mains. They are useful, and they work in the one place a plumber cannot go. Everything outside the pipe is manual. Soldering a joint next to a wood stud, freeing a corroded fitting without cracking the one behind it and setting a toilet on an uneven floor all depend on feel. So will AI replace plumbers? Nothing available today points that way.

### HVAC technicians

Equipment reports on itself better every year. Installing and servicing it still means carrying a unit into an attic, brazing line sets, sealing ductwork in a crawlspace and handling refrigerant. The spaces are cramped, hot and different in every building.

### Mechanics

Factories full of robots build cars. Almost nothing automated repairs them. A few machines have been shown that remove and refit wheels, which is a robot mechanic in the narrowest sense. Will AI replace mechanics beyond that? A repair starts with a vehicle in unknown condition: a seized bolt, a rusted bracket, a connector made brittle by heat, an earlier repair done wrong. The mechanic adjusts force by feel and stops before something snaps.

### Welders

Welding shows where the line runs. Robots have welded car bodies for decades, and smaller shops now use robot arms for repeat parts held in a fixture. Field and repair welding, where the joint is overhead and the fit-up is poor, is still done by hand. Whether AI will replace welders depends on which kind of welding is meant.

**[Tell us about your business](https://corpusmarket.com/robotics)** – Two minutes, no commitment. We contact you within 2 business days.

## Why crawlspaces, old houses and seized bolts are hard

Three things separate service work from the jobs robots do well.

1. **The space was not built for a machine.** Crawlspaces, attics, vanity cabinets and engine bays are tight and cluttered. Much of the work is done by reach, with the hands out of sight.
2. **Every job is the first of its kind.** An old house holds decades of other people's repairs. A ten-year-old truck has its own history of salt and heat. Nothing matches the diagram.
3. **The skill is in the hands.** How much torque a rusted fastener will take, when a joint is hot enough, whether a thread is starting to cross. None of that is written down.

A robot learns a physical task from examples, and for this kind of work the examples do not exist yet. [How robots learn](https://corpusmarket.com/robotics/how-robots-learn.md) explains the method, and the guide to [egocentric data collection](https://corpusmarket.com/robotics/egocentric-data-collection.md) explains why the footage has to come from the worker's own point of view.

## What labs want recorded in these trades

Labs ask for ordinary jobs done at ordinary speed by people who do them every day.

| Trade | Tasks labs ask for |
|---|---|
| Plumbing | Cutting and joining pipe, fixture installs, drain clearing, water heater swaps, leak repairs |
| Electrical | Pulling wire, device and fixture installs, panel work, terminations, testing with a meter |
| HVAC | Equipment installs, brazing, duct work, filter and coil service, testing and startup |
| Auto service | Brakes, tire and wheel work, fluid services, suspension, engine bay repairs |
| General | Tool handling, parts handling, cleanup |

Variety counts for more than polish. Ten different basements, or ten different makes and model years, teach a robot more than the same job repeated in one place. The awkward jobs are as useful as the clean ones. For new-build rough-in, see the page on [construction](https://corpusmarket.com/robotics/construction.md).

## What recording looks like in a customer's home or a shop bay

In the programme we introduce businesses to, run by our partner Amelia Robotics, a worker wears a phone on a headband or hardhat mount with the camera pointing down at the hands. The worker starts a recording in the programme's app, does the agreed task and stops it. Recordings are reviewed, and the business is paid for the hours that are approved.

In a shop bay this is simple to plan: the same space, the same lifts, a steady flow of vehicles. On service calls each stop is a new place, so businesses usually agree in advance which kinds of jobs get recorded.

- **It is voluntary for each technician.** Nobody records who does not want to.
- **The business decides the split.** How pay is shared between the worker and the company is set by the business together with the programme.
- **Setup is covered on a call.** Tasks, mounts and the app are gone through before anyone starts.

[How it works](https://corpusmarket.com/robotics/how-it-works.md) describes the steps in more detail.

## What has to be settled first

A service technician works in other people's space. A camera aimed at the hands in a kitchen can also catch family members, mail on the counter and the inside of someone's home. In a vehicle it can catch a license plate, paperwork in the glove box and personal belongings on the seat.

How that is handled differs from one business to the next. A shop's own bay is a different setting from a customer's bathroom. Some businesses record only in the shop, or only on certain job types. How customers are told, and what happens when one would prefer not to be part of it, is gone through for each business before recording starts. Our page on [recording at work](https://corpusmarket.com/robotics/recording-at-work.md) describes how the topic usually comes up.

## Next step for a trade business or shop

If your technicians do hands-on work and you want to know whether it fits, [tell us about your business](https://corpusmarket.com/robotics.md#form). It takes two minutes and commits you to nothing. We get back to you within 2 business days, and nothing is shared outside CorpusMarket before we have spoken with you.

## Frequently asked questions

### Will AI replace electricians?

Not with anything the technology can do today. AI helps with estimating, load calculations, code lookup and scheduling. Pulling cable through finished walls, reading someone else's old wiring and terminating conductors in a crowded panel are far beyond current robots.

### Will AI replace plumbers?

No near-term picture supports that. Robots that work in plumbing today travel inside sewer and water mains with a camera or a cutter. The work outside the pipe, in cabinets, walls and crawlspaces, is still done entirely by hand.

### Will AI replace mechanics?

AI is getting better at pointing to the likely fault from codes and symptoms. Confirming it and making the repair on a vehicle with rust, seized fasteners and brittle connectors still takes a person. A few machines handle single jobs such as swapping wheels.

### Will AI replace welders?

It depends on the welding. Robots have long welded repeat parts held in a fixture, in car plants and now in smaller shops. Field and repair welding, where the joint is out of position and nothing fits cleanly, is still manual.

### Is there a robot plumber or a robot mechanic today?

Only in a narrow sense. Pipe-crawling robots inspect and cut inside mains, and a few machines have been shown that take wheels off and put them back on. Nothing on the market does a service call or a general repair.

### Can a plumbing, electrical, HVAC or auto shop be paid for recording its work?

Yes, that is what the programme we introduce businesses to is for. It pays the business for recording hours that pass its quality review. What can be recorded in customers' homes and on customers' vehicles is gone through with each business first.
